Difference between revisions of "Talk:4000XL wiring"

Latest revision as of 10:43, 21 February 2014

Generac 84132 Voltage Regulator

rotating field

stator is outside non moving coils

The DPE winding is a coil that generates a pulse for the Field winding.

The duration of the current is controlled by an SCR-1

The voltage regulator controls the signal to the SCR-1 and therefore controls the Field current and output voltage.

Diode D2 allows only positive voltage to go through the Field winding.

The MOV-1 across the Field winding suppresses transients.

D1 R3 R1 sets a default current

--

@@ Line 1: / Line 1: @@
+Generac 84132 Voltage Regulator
+*From [http://www.smokstak.com/forum/showthread.php?t=95314 www.smokstak.com/forum/]
+*The 84132 Power Regulator Board was reverse-engineered by Warren914
+*[http://members.rennlist.org/warren/generac84132.pdf generac84132.pdf]
+rotating field
+stator is outside non moving coils
+The [[DPE winding]] is a coil that generates a pulse for the Field winding.
+The duration of the current is controlled by an [[SCR-1]]
+The voltage regulator controls the signal to the [[SCR-1]] and therefore controls the Field current and output voltage.
+[[Diode D2]] allows only positive voltage to go through the Field winding.
+The [[MOV-1]] across the Field winding suppresses transients.
+D1 R3 R1 sets a default current
+*D1 1N4007
+*R3 18K 1/2W
+*R1 47K 1/4W
+*C1 104K/250V at SCR-1 anode - same as [[1-BLK]]
+*[[P1-2]] Feedback to [[AVR]] ------------>
+*R2 68K 1/4W
+*GND
+*[[P1-1]] Shield - ground
+*[[P1-2]] Feedback to [[AVR]] ------------>
+*[[P1-3]] Gate  from [[AVR]]  <-----------
 --