Difference between revisions of "Talk:4000XL wiring"

Revision as of 09:40, 21 February 2014

Generac 84132 Voltage Regulator

rotating field

stator is outside non moving coils

The DPE winding is a coil that generates a pulse for the Field winding.

The duration of the current is controlled by an SCR-1

The voltage regulator controls the signal to the SCR-1 and therefore controls the Field current and output voltage.

Diode D2 allows only positive voltage to go through the Field winding.

The MOV-1 across the Field winding suppresses transients.

D1 R3 R1 sets a default current

--

@@ Line 1: / Line 1: @@
-Generac 84132 Voltage Regulator  [http://members.rennlist.org/warren/generac84132.pdf generac84132.pdf]
+Generac 84132 Voltage Regulator
+[http://members.rennlist.org/warren/generac84132.pdf generac84132.pdf]
@@ Line 22: / Line 24: @@
-C1 104K/250V at SCR-1 anode - same as [[1-BLK]]
+*C1 104K/250V at SCR-1 anode - same as [[1-BLK]]
-[[P1-2]] Feedback to [[AVR]] ------------>
+*[[P1-2]] Feedback to [[AVR]] ------------>
-R2 68K 1/4W
+*R2 68K 1/4W
-GND
+*GND
+*[[P1-1]] Shield - ground
+*[[P1-2]] Feedback to [[AVR]] ------------>
+*[[P1-3]] Gate  from [[AVR]]  <-----------
-[[P1-1]] Shield - ground
+--
-[[P1-2]] Feedback to [[AVR]] ------------>
-[[P1-3]] Gate  from [[AVR]]  <-----------