Difference between revisions of "Talk:4000XL wiring"

Revision as of 09:32, 21 February 2014

Generac 84132 Voltage Regulator generac84132.pdf

rotating field

stator is outside non moving coils

The DPE winding is a coil that generates a pulse for the Field winding.

The duration of the current is controlled by an SCR-1

The voltage regulator controls the signal to the SCR-1 and therefore controls the Field current and output voltage.

Diode D2 allows only positive voltage to go through the Field winding.

The MOV-1 across the Field winding suppresses transients.

D1 R3 R1 sets a default current

C1 104K/250V at SCR-1 anode - same as 1-BLK P1-2 Feedback to AVR ------------> R2 68K 1/4W GND

P1-1 Shield - ground P1-2 Feedback to AVR ------------> P1-3 Gate from AVR <-----------

Revision as of 09:28, 21 February 2014 (view source) Admin (talk \| contribs) m ← Older edit		Revision as of 09:32, 21 February 2014 (view source) Admin (talk \| contribs) m Newer edit →
Line 1:		Line 1:
−	Generac 84132 Voltage Regulator	+	Generac 84132 Voltage Regulator generac84132.pdf

	rotating field		rotating field