- -- - - - - - - - - - - - - - - - - -
Ddclient
From Batchelor-s
Revision as of 00:04, 18 July 2020 by Joe Batchelor (talk | contribs)
Need a dynamic DNS service
before install ddclient
sudo apt-get install ddclient libjson-any-perl libdata-validate-ip-perl
Please select the dynamic DNS service you are using. If the service you │
│ use is not listed, choose "other" and you will be asked for the protocol │ │ and the server name. │ │ │ │ Dynamic DNS service provider: │ │ │ │ www.dyndns.com │ │ www.easydns.com │ │ www.dslreports.com │ │ www.zoneedit.com │ │ other │ │ │ │ │ │ <Ok> │ │ (Other was selected)
│ Please enter the name of the server which is providing you with dynamic │
│ DNS service (example: members.dyndns.org). │ │ │ │ Dynamic DNS server: │ │ │ │ _________________________________________________________________________ │ │ │ │ <Ok> │ │ │ └───────────────────────────────────
Please select the dynamic DNS update protocol used by your dynamic DNS │ │ service provider. │ │ │ │ Dynamic DNS update protocol: │ │ │ │ dyndns2 │ │ dslreports1 │ │ easydns │ │ hammernode1 │ │ zoneedit1 │ │ dyndns1 │ │ │ │ │ │ <Ok> │ │ │ └──────────────────────────────────────────────────────────────────────────┘
Please enter the username to use with the dynamic DNS service. │
│ │
│ Username for dynamic DNS service: │
│ │
│ _______________________________________________________________ │
│ │
│ <Ok> │
│ │
└─────────────────────────────────────────────────────────────────┘
┌────────────────────┤ Configuring ddclient ├─────────────────────┐
│ Please enter the password to use with the dynamic DNS service. │
│ │
│ Password for dynamic DNS service: │
│ │
│ _______________________________________________________________ │
│ │
│ <Ok> │
│ │
└─────────────────────────────────────────────────────────────────┘
───────────────────────┤ Configuring ddclient ├─────────────────────────┐
│ Please enter your dynamic DNS service password again to make sure you │
│ typed it correctly. │
│ │
│ Re-enter password to verify: │
│ │
│ _______________________________________________________________________ │
│ │
│ <Ok> │
│ │
└─────────────────────────────────────────────────────────────────────────┘
┌─────────────────────────┤ Configuring ddclient ├──────────────────────────┐
│ Please enter the name of the network interface (eth0/wlan0/ppp0/...) to │
│ use for dynamic DNS service. │
│ │
│ Network interface used for dynamic DNS service: │
│ │
│ _________________________________________________________________________ │
│ │
│ <Ok> │
│ │
└───────────────────────────────────────────────────────────────────────────┘
│ Please enter the list of fully qualified domain names for the local │
│ host(s) (for instance, "myname.dyndns.org" with only one host or │
│ "myname1.dyndns.org,myname2.dyndns.org" for two hosts). │
│ │
│ DynDNS fully qualified domain names: │
│ │
│ _____________________________________________________________________ │
│ │
│ <Ok> │
│ │
└───────────────────────────────────────────────────────────────────────┘
_----------------------------
Copy the perl script to your favorite location
(ex. /usr/sbin)
and create a
/etc/ddclient/ddclient.conf
configuration file.
Do not forget to create the cache directory (where?)
