Talk:Soft Start

polling is probably better than interrupts

display

1. make an array A(1) -- A(8)

set display to request input one number at a time

for 8 numbers

convert the number to binary

step out each bit one at a time

---

display

1. to fine tune the output

allow changing any one of the numbers

perhaps set up a string in memory (how)

read bit

test input

if hi output bit or test input

if address > 127 goto test input

1. last bit should be 1
2. repeat - full ON

bump address

if > 127 then test input

IF ^C end #or clean up

goto read bit

xxxxxxxxxxxx

enter 16 numbers from keyboard

(16 bytes - 128 bits)

====

1. is this 5V or 3.3V ports ?

1. AND gate may need 5V

from gpiozero import LED, Button

led = LED(17)

button = Button(2)

while True:

.    button.wait_for_press() #clock

.    led.on() # drive to opto

.    button.wait_for_release()

.    led.off() #how long ON ?

1. will it need wave shaping

1. or will opto signal work ?

xxxxxxxxxxxxxxcc

clock to AND gate

data to AND gate

. to button (wait-release) . led (on-off) drives optoisolator .

=

--