- -- - - - - - - - - - - - - - - - - -
Difference between revisions of "Ffmpeg"
| Line 1: | Line 1: | ||
avconv | avconv | ||
| − | avconv -f alsa -ac 1 -i hw:1,0 -acodec pcm_s16le -ar 22050 -f rtp rtp://192.168.1.108:1234 | + | avconv [[-f alsa]] [[-ac 1]] [[-i hw:1,0]] [[-acodec pcm_s16le]] -ar 22050 [[-f rtp]] rtp://192.168.1.108:1234 |
Revision as of 17:36, 11 July 2015
avconv
avconv -f alsa -ac 1 -i hw:1,0 -acodec pcm_s16le -ar 22050 -f rtp rtp://192.168.1.108:1234
-f alsa — This tells avconv what type of input audio device we are using.
Since the microphone is a hardware device, it is handled by ALSA.
If a streaming a file, put the format of the file here.
Look at other audio formats by running
-ac 1 — Number of audio channels in the input stream.
-i hw:1,0 — input audio device is at the hardware address hw:1,0, where 1 is the card number and 0 is the device number on that card.
-acodec pcm_s16le — output format for the stream. The s16le part indicates each audio sample is 16 bits in Little Endian format.
-f rtp — output the audio as an RTP stream.
rtp rtp://192.168.1.108:1234 — the destination for the stream and the port number at that destination.
change IP to whatever is your machine.
Port 1234 was chosen arbitrarily.
--
