Difference between revisions of "Remote server"
m |
|||
Line 29: | Line 29: | ||
SSH server running | SSH server running | ||
+ | |||
+ | |||
Remote server will check the gateway address | Remote server will check the gateway address | ||
Line 34: | Line 36: | ||
Emails me the results | Emails me the results | ||
− | + | -------------------------- | |
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | + | crontab -e | |
− | + | 00 16 * * * ~/curl ipinfo.io/ip>>address_today.txt | |
+ | /usr/sbin/sendmail jxx@xxxxxxx.com < ~/address_today.txt | ||
− | + | _-------------------------- | |
sudo nano /etc/sysctl.d/routed-ap.conf ? | sudo nano /etc/sysctl.d/routed-ap.conf ? |
Revision as of 22:08, 19 July 2020
I am not sure that you know what was in the rpi
that I gave you. It had lamp installed
running a Private Cloud with the wiki.
A turnkey system for $100 is a good deal.
You can get a pizero W for $10 plus tax and shipping.
But then you need an SD card and power supply.
Then download the software
and burn it to the SD card.
Then a lot of time to set it up.
If you would like another one then email Mr Pi
- Proof of Concept - remote server
SSH server running
Remote server will check the gateway address
Emails me the results
crontab -e
00 16 * * * ~/curl ipinfo.io/ip>>address_today.txt
/usr/sbin/sendmail jxx@xxxxxxx.com < ~/address_today.txt
_--------------------------
sudo nano /etc/sysctl.d/routed-ap.conf ?
sudo nano /etc/sysctl.conf ?
- Enable IPv4 routing
net.ipv4.ip_forward=1
sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
sudo netfilter-persistent save
- Filtering rules are saved to the directory /etc/iptables/
sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
sudo sh -c "iptables-save > /etc/iptables.ipv4.nat"
sudo nano /etc/rc.local
- Add above “exit 0”:
iptables-restore < /etc/iptables.ipv4.nat
- run
- sudo systemctl unmask hostapd
- sudo systemctl enable hostapd
- sudo systemctl start hostapd
- sudo service dnsmasq start