Difference between revisions of "Remote server"

Latest revision as of 16:45, 19 May 2024

I am not sure that you know what was in the rpi

It had lamp installed

running a Private Cloud with the wiki.

A turnkey system for $100 is a good deal.

You can get a pizero W for $20 plus tax and shipping.

But then you need an SD card and power supply.

Then download the software

and burn it to the SD card.

Then a lot of time to set it up.

SSH server running

Remote server will check the gateway address

Emails me the results

@@ Line 2: / Line 2: @@
 I am not sure that you know what was in the '''[[rpi]]'''
-that I gave you. It had '''[[lamp]]''' installed
+It had '''[[lamp]]''' installed
 running a Private Cloud with the wiki.
@@ Line 8: / Line 8: @@
 A turnkey system for $100 is a good deal.
-You can get a pizero W for $10 plus tax and shipping.
+You can get a pizero W for $20 plus tax and shipping.
 But then you need an SD card and power supply.
@@ Line 18: / Line 18: @@
 Then a lot of time to set it up.
-If you would like another one then email [mailto:pi@batchelor-s.com Mr Pi]
@@ Line 37: / Line 37: @@
 --------------------------
-crontab -e
-16 * * * ~/curl ipinfo.io/ip>>address_today.txt
-/usr/sbin/sendmail jxx@xxxxxxx.com < ~/address_today.txt
-_--------------------------
-sudo nano /etc/sysctl.d/routed-ap.conf ?
-sudo nano /etc/sysctl.conf ?
-# Enable IPv4 routing
-net.ipv4.ip_forward=1
-sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
-sudo netfilter-persistent save
-#Filtering rules are saved to the directory /etc/iptables/
-sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
-sudo sh -c "iptables-save > /etc/iptables.ipv4.nat"
-sudo nano /etc/rc.local
-#Add above “exit 0”:
-iptables-restore < /etc/iptables.ipv4.nat
-#run
-*sudo systemctl unmask hostapd
-*sudo systemctl enable hostapd
-*sudo systemctl start hostapd
-*sudo service dnsmasq start
 [[--]]